The volume in the floor is larger than it looks
To protect the property, a saturated cushion holds roughly a gallon of water for every 10 square feet of floor. An average bedroom is 10 to 15 gallons before the subfloor is counted.
Rooms and affected areas
Clovis, CA
Carpet Water Extraction in Clovis, CA
Our restoration team extracts water from carpet and padding, treats affected areas, and determines whether the flooring can be safely restored.
- Restoration calls answered 24/7
- Care for residential and commercial properties
- Clear cleanup and drying recommendations
- One restoration team from assessment to dry-out
Signs to look for
When to call us for carpet extraction
If you notice any of these problems, call us before water has more time to spread into nearby materials.
The carpet feels cool and heavy but not obviously wet
For a careful restoration, cut pile carpet wicks water up and evaporates from the tips, so the surface reads dry. The weight underfoot is coming from the backing and the pad.
A dark tide line runs along the base of the wall
To protect the property, carpet pulls water outward and upward at the perimeter. That line marks how far the water traveled after it stopped moving on its own.
The carpet has lifted off the tack strip in a corner
For a careful restoration, wet carpet gets heavy and pulls free of the tack strip pins. Loose corners also mean the backing has stretched and will need attention later.
A seam has opened or is peaking
To protect the property, seam tape is held with adhesive that softens when it stays wet. An open carpet seam is a repair, and a peaked one means the carpet is swelling against itself.
The backing feels gritty or crunchy underfoot
To protect the property, latex adhesive between the face and the secondary backing breaks down as it stays wet. That texture is layers separating starting, and it does not reverse.
What happens
How we handle carpet extraction
Our restoration team adjusts the work to where the water reached, how far the water traveled, and which materials can be saved.
A moisture read through the whole assembly
We verify the pile, the pad and the subfloor with a moisture meter before starting. The reading through to the deck decides the method, not how wet the surface feels.
Passes that reach the backing, not the pile
For a clear next step, a weighted extraction tool presses the carpet and cushion into the vacuum slot so water leaves the backing.
The float or pad pull decision
To protect the property, floating means detaching one edge and pushing air between the carpet and the cushion. We find it over pad removal when the water was clean and the cushion is worth trying.
Perimeter and detail extraction
As we plan the work, water concentrates at the walls and under the tack strip line, where a big tool cannot sit flat.
Seam and stretch protection while we work
We keep tools off open seams and support loose edges instead of dragging on them. Careless extraction is how a saveable carpet ends up needing a carpet stretch and a seam repair.
Drying equipment sized to the assembly
As we plan the work, air movers are placed to sweep the surface or the space under a floated carpet, and an Professional dehumidifier removes that moisture from the air.
Talk with a restoration specialist
Concerned about water damage in Clovis, CA?
Walk us through what you see, where the water originated, and the spaces it reached.
What to expect
What to expect from our restoration team
Here is how we usually handle carpet extraction near Clovis, CA.
-
1
Walk us through how deep and how long
For a clear next step, say how much water is on the carpet, what it came from, and how many hours it has been there.
Your call -
2
Stay off it and get the furniture up
For a careful restoration, walking on soaked carpet drives water deeper into the pad and stresses the backing.
+5 minutes -
3
Read the assembly and set the plan
To protect the property, a technician meters the pile, the pad and the subfloor and checks the seams and the tack strip.
On arrival -
4
Gross extraction on the free water
For a careful restoration, the truck mounted extractor pulls the standing volume out of the assembly first. Most of the water in the room leaves during this stage.
First hour on site -
5
Slow weighted passes until it stops giving water
For a clear next step, weighted and self propelled tools work the room in overlapping slow passes, then the perimeter and closets get detailed.
Day 1 -
6
Carpet floated or pad removed, then equipment set
For a clear next step, if we float, an edge is detached and air is pushed between the carpet and the pad.
Day 1, evening -
7
Daily readings through carpet, pad and deck
As we plan the work, the same points get read every visit and logged, including the subfloor under the assembly. Carpet is usually the first layer to reach target and the deck the last.
Day 2 to 3
Understanding the cost
What can affect the price
We review with you the proposed restoration steps and price before you approve the job. These examples show what may change the estimate.
| Common situation | What the estimate may include | Typical range |
|---|---|---|
| Carpet and pad extraction, one to two rooms, pad left in place | As we plan the work, national estimate for the extraction stage only. Drying equipment is billed separately per unit per day. | $350 to $1,000 |
| Carpet extraction priced by area, clean water | As we plan the work, national estimate for the mechanical extraction stage on typical residential carpet and cushion. | $1 to $3 per square foot |
| Whole floor of wet carpet, three or more rooms | For a careful restoration, national estimate for extraction across a connected carpeted floor, before drying equipment and cleaning. Larger continuous areas price nearer the low end per room because setup is shared. | $700 to $2,500 |
| Drying equipment only, one carpeted room, three days | As we plan the work, national estimate for the equipment line alone, according to typical air mover and dehumidifier day rates. | $300 to $700 |
| Hot water extraction cleaning after drying, per square foot | For a careful restoration, national estimate for cleaning and grooming the carpet once the assembly is verified dry. | $0.25 to $0.60 |
| Reattach and stretch a floated carpet, per square foot | For a careful restoration, national estimate covering laying the carpet back on the tack strip, stretching and minor seam repair. | $0.60 to $1.50 |
Square footage of wet carpet
We measure the water-affected space with a meter, which is often smaller than the room. Water spreads unevenly and stops where the pad stops taking it.How saturated the pad is
As we plan the work, a damp assembly takes a couple of passes. A pad holding standing water takes many slow passes and more equipment days.Float versus pad removal
As we plan the work, floating keeps your carpet and pad in place and saves material cost. Pad removal adds tear out, disposal and new cushion, but often shortens the drying by a day.Carpet construction
To protect the property, cut pile releases water readily under a weighted tool. Berber, dense commercial glue down and jute backed goods each take more care and more time.Access and furniture
As we plan the work, stairs, tight hallways and heavily furnished rooms slow the tool down. Moving and blocking contents is labor before extraction even starts.Equipment days
As we plan the work, air movers run roughly $25 to $40 per unit per day and Professional dehumidifiers roughly $70 to $110 per unit per day.
Why timing matters
What can happen when the area stays wet
Water can keep moving into nearby materials even when the surface looks dry.
The backing delaminates and the carpet is done
To protect the property, latex adhesive holding the face to the secondary backing softens and lets go when it stays wet.
Jute backing shrinks and never fits again
For a careful restoration, older carpets and many rugs use jute backing, which shrinks hard as it dries. A shrunken carpet pulls away from the walls and cannot be stretched back out.
Seams open and edges have to be reworked
As we plan the work, seam tape adhesive fails after a day or two under water. What was a drying job becomes a drying job plus flooring repair.
Wicking pulls stains up from the pad
To protect the property, as the assembly dries, water travels up through the fibers and carries old soil with it. Marks appear on a carpet that looked fine while it was wet.
Helpful service information
What to know about carpet extraction
First, share the short explanation. Open a card if you want a little more detail.
What is happening inside the property
For a clear next step, the slot has to seat flat so it seals against the secondary backing, because that is the layer holding the water.
Read the explanation
As we plan the work, carpet extraction is decided at the vacuum slot. The slot has to seat flat so it seals against the secondary backing, because that is the layer holding the water.
How the next step is decided
For a clear next step, one edge comes off the tack strip, then an air mover is aimed into the gap so dry air travels between the carpet and the pad.
Read the explanation
As we plan the work, floating a carpet is the technique that saves both layers. One edge comes off the tack strip, then an air mover is aimed into the gap so dry air travels between the carpet and the pad.
What may change the work
For a careful restoration, the face yarn is tufted through a primary backing, then a secondary backing is bonded on with latex adhesive.
Read the explanation
To protect the property, carpet is built in layers, and water attacks the glue between them. The face yarn is tufted through a primary backing, then a secondary backing is bonded on with latex adhesive.
Common questions
Questions about carpet extraction
Can wet carpet be saved?
For a clear next step, usually yes when the water was clean and we reach it within a day or two. Extraction, drying and cleaning bring most carpet back.
What does floating the carpet mean?
We detach one edge from the tack strip and blow air between the carpet and the pad. That dries both layers from the middle out.
How do you decide whether to float or pull the pad?
For a careful restoration, water cleanliness first, then how saturated the cushion is, then the value of the carpet. Clean water and a moderately wet pad favor floating.
How long does carpet extraction take?
For a careful restoration, the extraction itself is usually a few hours on one to two rooms. Drying the assembly commonly takes three days.
Can I dry the carpet myself?
As we plan the work, a shop vacuum handles surface water up to about an inch and never reaches the backing. Home machines lack the weight and vacuum to pull water from the pad.
Will walking on wet carpet make it worse?
For a careful restoration, yes. Foot traffic drives water deeper into the cushion and stresses the backing and the seams. Stay off it until it has been extracted.
What is carpet layers separating?
For a clear next step, it is the face of the carpet separating from its secondary backing, because the latex adhesive between them failed.
Talk with a restoration specialist
Concerned about water damage in Clovis, CA?
Walk us through what you see, where the water originated, and the spaces it reached.
Areas we serve
Water-damage help near Clovis, CA
Our restoration team assists homes, businesses, and managed properties throughout Clovis, CA and surrounding communities.
View the area on Google Maps